PRODUCT DESCRIPTION. Dura-Plate PW Multi-Purpose epoxy is a modified epoxy phenalkamine, certified by NSF to Standard 61 as a. Dura-Plate Multi-Purpose Epoxy is a modified epoxy phenalkamine, formulated specifically for immersion and atmospheric service in marine and. The Sherwin-Williams Company. Dura-Plate Multi-Purpose Epoxy. PRODUCT DESIGNATIONS. Dura-Plate (B67HA/B67VB). MIL-PRF-
||14 March 2017
|PDF File Size:
|ePub File Size:
||Free* [*Free Regsitration Required]
We needed something that was low-maintenance dkraplate easy to wash down,” says Bradbury. If you can keep the facility cleaner, it’s much easier to maintain the quality of the water. Water is also supplied by four shallow alluvial aquifer wells and one deep well that penetrates the bedrock of the Jordan aquifer.
Protective and Marine, Dura-Plate Multi-Purpose Epoxy, B6W/B67V, on Designer Pages
Dura-Plate was submitted and approved, according to Dave Kelchen, Sherwin-Williams Industrial and Marine Coatings specialist, because the product is specifically engineered and formulated to control corrosion and provide maximum durability and resistance to frequent water washdowns, chemical solvents, and abrasives.
With its greater water treatment capacity, the new facility is another tool for attracting to the Iowa City area companies requiring large amounts of water. Two coats of this high performance epoxy were then applied to a 5 to 6 mil, DFT per coat. Rubbing a concrete dkraplate with additional concrete or grout is done to prevent the formation of holes and voids. The majority of water comes from four horizontal collector wells with direct intake from the Iowa River.
The previous treatment plant, which the new facility has replaced, was nearly years old. For further information, phone Specialty coating required in containment areas In areas where even greater chemical protection was required, Sherwin-Williams Shelcote II was specified, according to Duben.
This was particularly helpful on this project, because city officials emphasized the importance of cleanliness and 2335 efficiency as they likened their plant requirements to the strict standards typical of food processing environments. Among the regulations that created the need for new plant construction were lower maximum contamination levels MCLs on inorganic chemicals, organic byproducts, and radionuclides, according to Shaun Bradbury, special projects manager of Iowa City.
All projects must have been in the design or udraplate phase over the last 18 months. Dura-Plate is an epoxy phenalkamine formulated specifically for service in industrial and marine environments.
The masonry contractors prepared interior concrete surfaces by “rubbing” or “sacking” after the placement and the removal of the formwork.
Improving taste and odor was a goal to improve the aesthetic quality of our water. For long-term corrosion protection, and the ability to maintain the dduraplate “clean” appearance, high performance epoxy coatings from Sherwin-Williams were selected for these surfaces.
Iowa City’s population fluctuates regularly due to the arrival and departure of its college students — some 30, in number — during the year.
More than 13, yards of cast-in-place concrete were utilized in the plant’s construction. Ten years in planning, the new water plant went online percent on March 7,designed to better serve Iowa City’s growing population. The new plant was constructed with concrete and houses several steel and fiberglass processing tanks and storage vessels.
Rick Snyder made the call to stop distributing water.
Before the treatment plant was closed in, some initial painting occurred during the coldest months of the year in Iowa City. It also is suitable for use in USDA-inspected facilities.
A man-made lake located on the plant site will provide a udraplate source of water. Green Company, the city sought to create a structure that would meet its immediate and future requirements for the next 50 to years. Business News Round Up – Dec. By enlisting the services of engineering firm Howard R.
Dura-Plate – PW – Epoxy – Multi-Purpose Epoxy by Sherwin-Williams
According to Mohling, the epoxy’s low temperature properties allowed his crew to work unhindered despite the temperature, duraplatte to obtain the required film build and spread rate. A computer glitch at a filtration plant may have allowed minerals to seep into the water turning the water brown in Lake Station, Ind. As weather and temperature conditions improved, Dura-Plate continued to be used on interior PVC piping, ductwork, conduit and other galvanized and concrete surfaces throughout the water treatment facility.
It is also designed to meet ever-increasing state and federal drinking water quality standards, and to improve the taste and odor of the water supply for the area’s Hawkeye State citizens.
All coating systems maintained a DFT between 6 – 10 mils. As home to the University of Iowa, Iowa City lays duraplatw to many “big city” attributes: After the surface was prepared, two coats of the multi-purpose epoxy were applied at 4 – 6 mils dry film thickness DFT per coat on interior concrete walls and ceilings as well as steel columns, beams, and stair stringers.
As a result, water consumption and treatment fluctuate. These varied substrates all needed to receive coating systems that 2235 be pleasing to workers and visitors alike, illustrating that this community is interested in combining function along with eye-catching design. Green Company to ensure long-term corrosion protection and chemical resistance.
This aquifer covers nearly all of the state of Iowa and is used by many communities as a major water supply source. This process provides 253 dense, uniform surface that is rougher than that provided by steel troweling and ready to paint immediately after drying and curing.
Because construction was scheduled to take place during winter months, some of the coatings applied had to be tolerant of low temperatures. In areas where even greater chemical protection was required, Sherwin-Williams Shelcote II was specified, according to Duben.
The plant uses a combination of surface and ground water sources for better overall water quality. Duben specified Shelcote II — a high-solids, amine cured epoxy coating designed for resistance to a broad range of aqueous and petroleum-based chemicals including MTBE.
By taking a combination of water from the river and the aquifers, we are protected against potential contamination from any one source. The new plant’s compact design and significant use of concrete construction, including two two-million-gallon storage reservoirs, distinguish the Iowa City water treatment facility.
Brown Water in Indiana Town. Daytime winter temperatures in Iowa City are routinely in the 30s, but may plummet after dark, so low temperature tolerance was another important factor in product selection. Acrolon HS is a two-component, low VOC, acrylic polyurethane coating designed for high performance protection when maximum exterior 25 and color retention is needed.
In addition, the protective coating systems for this project were also intended to enhance operation and maintenance efficiency.
The selection of protective coating systems was a critical consideration of Howard R. This is in addition, of course, to durapalte the facility’s primary aim: